Mon – Sat · 10:00 am – 7:00 pm

Standards & Specifications

The international product, dimensional and testing standards Honesty Impex supplies pipes, tubes, sheets, plates, fittings, flanges, round bars and fasteners to – in stainless, carbon, mild, alloy, tool & high speed steels and non-ferrous metals – ASTM, ASME, API, EN, DIN, BS, IS, ISO, JIS and MSS.

160+ Specifications 8 Categories · 7 Materials EN 10204 3.1 / 3.2
  • ASTMASTM International
  • ASMEAmerican Society of Mechanical Engineers
  • ENEuropean Standards (CEN)
  • DINGerman Institute for Standardisation
  • BSBritish Standards Institution
  • ISBureau of Indian Standards
  • JISJapanese Industrial Standards
  • MSSManufacturers Standardization Society
Specification Basics

How to Read a Specification

A material designation on a purchase order or mill certificate tells you exactly what was ordered. Here is a typical stainless pipe designation, decoded.

  1. 1
    ASME SA-312ASME Boiler & Pressure Vessel Code (Section II) version of the specification – required for code-stamped construction.
  2. 2
    ASTM A312The ASTM product specification – here, seamless and welded austenitic stainless steel pipe.
  3. 3
    TP316LGrade within the specification – "TP" (type) 316, "L" for low carbon (≤ 0.03% C).
  4. 4
    SMLSProduct type – seamless (WLD = welded, EFW = electric-fusion welded).
  5. 5
    2" SCH 40SSize and wall – nominal pipe size and schedule per ASME B36.19M.

ASTM "A" vs ASME "SA"

ASME adopts ASTM material specifications into the Boiler & Pressure Vessel Code with an "S" prefix – ASTM A312 becomes ASME SA-312. The requirements are usually identical, sometimes with additional ASME requirements.

Dual Certification

Material that meets both grades – for example 316/316L or ASTM A312/ASME SA-312 – can be certified to both on a single mill certificate, giving flexibility in design and procurement.

Product vs General Specs

A product specification (e.g. A312) refers to a general-requirements specification (e.g. A999) for common rules on tolerances, testing, marking and certification.

Editions Matter

Standards are revised periodically. Unless a specific edition is stated on the order, material is supplied to the current edition of the specification.

Standards Directory

Specifications We Supply To

Filter by product or search by specification number, material or grade.

Showing all 163 specifications

Pipes & Tubes 32

ASTM A312ASTM

Seamless, welded and heavily cold-worked austenitic stainless steel pipes

TP304/304L, TP316/316L, TP310S, TP321, TP347

ASTM A213ASTM

Seamless ferritic and austenitic alloy-steel boiler, superheater and heat-exchanger tubes

T11, T22, T91, TP304, TP316

ASTM A249ASTM

Welded austenitic steel boiler, superheater, heat-exchanger and condenser tubes

TP304/304L, TP316/316L

ASTM A269ASTM

Seamless and welded austenitic stainless steel tubing for general service

TP304/304L, TP316/316L

ASTM A270ASTM

Seamless and welded austenitic and duplex stainless steel sanitary tubing

TP304, TP316L

ASTM A790ASTM

Seamless and welded ferritic/austenitic (duplex) stainless steel pipe

S31803, S32205, S32750, S32760

ASTM A789ASTM

Seamless and welded ferritic/austenitic (duplex) stainless steel tubing for general service

S31803, S32205, S32750

ASTM A106ASTM

Seamless carbon steel pipe for high-temperature service

Grade A, B, C

ASTM A53ASTM

Pipe, steel, black and hot-dipped zinc-coated, welded and seamless

Grade A, B

ASTM A333ASTM

Seamless and welded steel pipe for low-temperature service

Grade 1, 3, 6

ASTM A335ASTM

Seamless ferritic alloy-steel pipe for high-temperature service

P5, P9, P11, P22, P91

ASTM B165ASTM

Nickel-copper alloy seamless pipe and tube

Monel 400 (N04400)

ASTM B167ASTM

Nickel-chromium-iron alloy seamless pipe and tube

Inconel 600 (N06600), 601, 690

ASTM B444ASTM

Nickel-chromium-molybdenum-columbium alloy pipe and tube

Inconel 625 (N06625)

ASTM B622ASTM

Seamless nickel and nickel-cobalt alloy pipe and tube

Hastelloy C-276 (N10276), C-22 (N06022)

ASTM B338ASTM

Seamless and welded titanium and titanium-alloy tubes for condensers and heat exchangers

Grade 2, Grade 5

ASTM B861ASTM

Titanium and titanium-alloy seamless pipe

Grade 2, Grade 5

EN 10216-5EN

Seamless steel tubes for pressure purposes – stainless steel tubes

1.4301, 1.4404, 1.4462

EN 10217-7EN

Welded steel tubes for pressure purposes – stainless steel tubes

1.4301, 1.4404

IS 1239 (Part 1)BIS

Steel tubes, tubulars and other wrought steel fittings – mild steel tubes

Light, medium, heavy

JIS G3459JIS

Stainless steel pipes

SUS304TP, SUS316LTP

API 5LAPI

Line pipe for oil and gas transportation

Gr. B, X42, X52, X60, X65 (PSL1 / PSL2)

ASTM A268ASTM

Seamless and welded ferritic and martensitic stainless steel tubing for general service

TP410, TP430, TP409

ASTM B466ASTM

Seamless copper-nickel pipe and tube

C70600 (90/10), C71500 (70/30)

ASTM B111ASTM

Copper and copper-alloy seamless condenser tubes and ferrule stock

C70600, C71500, C44300, C68700

ASTM B75 / B88ASTM

Seamless copper tube – general and water service

C12200 (DHP)

ASTM B407ASTM

Nickel-iron-chromium alloy seamless pipe and tube

Incoloy 800 / 800H (N08800 / N08810)

ASTM B423ASTM

Nickel-iron-chromium-molybdenum-copper alloy seamless pipe and tube

Incoloy 825 (N08825)

EN 10216-2EN

Seamless steel tubes for pressure purposes – non-alloy and alloy steel tubes with elevated-temperature properties

P235GH, P265GH, 13CrMo4-5, 10CrMo9-10

IS 1161BIS

Steel tubes for structural purposes

YSt 210, 240, 310

IS 3589BIS

Steel pipes for water and sewage (168.3 – 2540 mm OD)

Fe 330, Fe 410

IS 1978BIS

Line pipe

Gr. A, B, X42 – X70

Plates & Sheets 24

ASTM A240ASTM

Chromium and chromium-nickel stainless steel plate, sheet and strip for pressure vessels and general applications

304/304L, 316/316L, 310S, 410, 430, 2205, 2507

ASTM A516ASTM

Carbon steel pressure-vessel plates for moderate and lower-temperature service

Grade 55, 60, 65, 70

ASTM A387ASTM

Chromium-molybdenum alloy steel pressure-vessel plates

Grade 11, 12, 22

ASTM A36ASTM

Carbon structural steel

Plates, bars and shapes

ASTM B127ASTM

Nickel-copper alloy plate, sheet and strip

Monel 400 (N04400)

ASTM B168ASTM

Nickel-chromium-iron alloy plate, sheet and strip

Inconel 600 (N06600), 601

ASTM B443ASTM

Nickel-chromium-molybdenum-columbium alloy plate, sheet and strip

Inconel 625 (N06625)

ASTM B575ASTM

Low-carbon nickel-molybdenum-chromium alloy plate, sheet and strip

Hastelloy C-276, C-22

ASTM B265ASTM

Titanium and titanium-alloy strip, sheet and plate

Grade 1, 2, 5

ASTM B209ASTM

Aluminium and aluminium-alloy sheet and plate

5083, 6061, 6082

ASTM B152ASTM

Copper sheet, strip, plate and rolled bar

C11000 (ETP)

EN 10028-7EN

Flat products made of steels for pressure purposes – stainless steels

1.4301, 1.4404, 1.4462

EN 10025-2EN

Hot-rolled products of structural steels – non-alloy structural steels

S235, S275, S355

IS 2062BIS

Hot-rolled medium and high tensile structural steel

E250, E350, E410

ASTM A1011 / A1008ASTM

Hot-rolled and cold-rolled carbon steel sheet and strip

CS, DS, SS grades

ASTM B162ASTM

Nickel plate, sheet and strip

Nickel 200 / 201

ASTM B409ASTM

Nickel-iron-chromium alloy plate, sheet and strip

Incoloy 800 / 800H / 825

ASTM B171ASTM

Copper-alloy plate and sheet for pressure vessels, condensers and heat exchangers

C70600, C71500, C46400

ASTM B36ASTM

Brass plate, sheet, strip and rolled bar

C26000, C27200

EN 10028-2EN

Flat products made of steels for pressure purposes – non-alloy and alloy steels with elevated-temperature properties

P265GH, P295GH, 16Mo3, 13CrMo4-5

IS 2002BIS

Steel plates for pressure vessels for intermediate and high temperature service including boilers

Gr. 1, Gr. 2, Gr. 3

IS 1079BIS

Hot-rolled carbon steel sheet and strip

HR1 – HR4

IS 513BIS

Cold-reduced low-carbon steel sheet and strip

CR1 – CR5

IS 3502BIS

Steel chequered plates

MS chequered plate

Round Bars & Tool Steels 36

ASTM A276ASTM

Stainless steel bars and shapes

304/304L, 316/316L, 410, 420, 431

ASTM A479ASTM

Stainless steel bars and shapes for use in boilers and other pressure vessels

304/304L, 316/316L, 2205

ASTM A582ASTM

Free-machining stainless steel bars

303, 416, 430F

ASTM A29ASTM

General requirements for hot-wrought carbon and alloy steel bars

1020, 1045, 4140, 4340, 8620

ASTM A322ASTM

Steel bars, alloy, standard grades

4140, 4340, 5140, 8620

ASTM A681ASTM

Tool steels, alloy

D2, D3, H11, H13, O1, P20

ASTM B164ASTM

Nickel-copper alloy rod, bar and wire

Monel 400, K-500

ASTM B166ASTM

Nickel-chromium-iron alloy rod, bar and wire

Inconel 600 (N06600)

ASTM B446ASTM

Nickel-chromium-molybdenum-columbium alloy rod and bar

Inconel 625 (N06625)

ASTM B574ASTM

Low-carbon nickel-chromium-molybdenum alloy rod

Hastelloy C-276, C-22

ASTM B348ASTM

Titanium and titanium-alloy bars and billets

Grade 2, Grade 5

ASTM B16ASTM

Free-cutting brass rod, bar and shapes for use in screw machines

C36000

ASTM B211ASTM

Aluminium and aluminium-alloy rolled or cold-finished bar, rod and wire

6061, 2011

ASTM B221ASTM

Aluminium and aluminium-alloy extruded bars, rods, wire, profiles and tubes

6061, 6082, 6063

BS 970BS

Wrought steels for mechanical and allied engineering purposes (origin of "EN" designations)

EN1A, EN3B, EN8, EN16, EN19, EN24, EN31, EN36, EN353

EN 10083EN

Steels for quenching and tempering

C45, 42CrMo4, 34CrNiMo6

EN 10084EN

Case-hardening steels

16MnCr5, 20MnCr5, 20NiCrMo2-2

EN 10085EN

Nitriding steels

41CrAlMo7-10

EN 10088-3EN

Stainless steels – semi-finished products, bars, rods, wire, sections

1.4301, 1.4404, 1.4057

ISO 4957ISO

Tool steels

X153CrMoV12 (D2), X40CrMoV5-1 (H13)

IS 1570BIS

Schedules for wrought steels (Indian designations)

Carbon, alloy and stainless steels

BS 1407BS

High-carbon bright steel (silver steel)

Ground and polished bar

ASTM A600ASTM

Tool steel high speed

T1, T4, T15, T42, M2, M35, M42

IS 7291BIS

High speed tool steels – designation and composition

XT72W18Cr4V1, XT87W6Mo5Cr4V2, XT110Mo10Co8Cr4W2

IS 3749BIS

Tool and die steels for hot work

XT35Cr5MoV1 (H13), T55Ni2Cr65Mo30 (DB6)

BS 4659BS

Tool and die steels

BD2, BD3, BH11, BH13, BO1, BM2, BM35, BM42

ASTM A108ASTM

Steel bar, carbon and alloy, cold-finished

1018, 1045, 12L14, 4140

EN 10087EN

Free-cutting steels

11SMn30, 11SMnPb30, 36SMn14

IS 9550BIS

Bright steel bars

EN 3B, EN 8, EN 1A, EN 19 bright bars

IS 5517BIS

Steels for hardening and tempering

40Cr1Mo28, 40Ni2Cr1Mo28, 45C8

ASTM B187ASTM

Copper, bus bar, rod and shapes and general-purpose rod, bar and shapes

C11000, C10100

ASTM B150ASTM

Aluminium bronze rod, bar and shapes

C63000, C63200, C95500

ASTM B139ASTM

Phosphor bronze rod, bar and shapes

C51000, C54400

ASTM B160ASTM

Nickel rod and bar

Nickel 200 / 201

ASTM B425ASTM

Nickel-iron-chromium-molybdenum-copper alloy rod and bar

Incoloy 825

ASTM B637ASTM

Precipitation-hardening nickel alloy bars, forgings and forging stock

Inconel 718

Fittings 15

ASTM A403ASTM

Wrought austenitic stainless steel piping fittings

WP304/304L, WP316/316L, WP321

ASTM A234ASTM

Wrought carbon and alloy steel piping fittings for moderate and high-temperature service

WPB, WPC, WP11, WP22, WP91

ASTM A420ASTM

Wrought carbon and alloy steel piping fittings for low-temperature service

WPL3, WPL6

ASTM A815ASTM

Wrought ferritic, ferritic/austenitic (duplex) and martensitic stainless steel piping fittings

WPS31803, WPS32205, WPS32750

ASTM B366ASTM

Factory-made wrought nickel and nickel-alloy fittings

Monel, Inconel, Hastelloy

ASME B16.9ASME

Factory-made wrought buttwelding fittings – dimensions and tolerances

Elbows, tees, reducers, caps

ASME B16.11ASME

Forged fittings, socket-welding and threaded

Class 2000, 3000, 6000, 9000

MSS SP-43MSS

Wrought and fabricated butt-welding fittings for low-pressure, corrosion-resistant applications

Sch 5S, 10S stainless fittings

MSS SP-97MSS

Integrally reinforced forged branch outlet fittings

Weldolet, sockolet, threadolet

ASTM A182 (fittings)ASTM

Forged socket-weld and threaded fittings in alloy and stainless steel

F304/304L, F316/316L, F11, F22, F51

ASTM A105 (fittings)ASTM

Carbon steel forged socket-weld and threaded fittings

Elbows, tees, couplings, unions, olets

EN 10253-2 / -4EN

Butt-welding pipe fittings – non-alloy / stainless steels with specific inspection requirements

P235GH, 1.4301, 1.4404

MSS SP-95MSS

Swage(d) nipples and bull plugs

Concentric and eccentric swages

MSS SP-75MSS

High-strength wrought welding fittings for pipelines

WPHY 42 – 70

ASME B16.3ASME

Malleable iron threaded fittings

Class 150, 300

Flanges & Forgings 15

ASTM A182ASTM

Forged or rolled alloy and stainless steel pipe flanges, forged fittings, valves and parts

F5, F11, F22, F304/304L, F316/316L, F51, F53

ASTM A105ASTM

Carbon steel forgings for piping applications

Flanges, fittings, valve parts

ASTM A350ASTM

Carbon and low-alloy steel forgings requiring notch toughness testing for piping components

LF2, LF3

ASTM A694ASTM

Carbon and alloy steel forgings for pipe flanges, fittings and parts for high-pressure transmission service

F52, F60, F65

ASTM B564ASTM

Nickel-alloy forgings

Monel 400, Inconel 600/625, C-276

ASTM B381ASTM

Titanium and titanium-alloy forgings

Grade F2, F5

ASME B16.5ASME

Pipe flanges and flanged fittings – NPS ½ through NPS 24

Class 150 to 2500

ASME B16.47ASME

Large-diameter steel flanges – NPS 26 through NPS 60

Series A and Series B

ASME B16.48ASME

Line blanks

Spectacle blinds, spacers, paddle blanks

EN 1092-1EN

Flanges and their joints – steel flanges, PN designated

PN 6 to PN 400

ASME B16.36ASME

Orifice flanges

Class 300 – 2500

ASME B16.20ASME

Metallic gaskets for pipe flanges – ring-joint, spiral-wound and jacketed

RTJ R / RX / BX rings

MSS SP-44MSS

Steel pipeline flanges

NPS 12 – 60, F42 – F70

IS 6392BIS

Steel pipe flanges

PN 2.5 – PN 400

ASTM B462ASTM

Forged or rolled UNS N06030, N08020, N08904 and other alloy pipe flanges, forged fittings and valve parts

904L, Alloy 20, 254SMO

Fasteners 15

ASTM A193ASTM

Alloy and stainless steel bolting for high-temperature or high-pressure service

B7, B8, B8M, B16

ASTM A194ASTM

Carbon, alloy and stainless steel nuts for high-pressure or high-temperature service

2H, 4, 7, 8, 8M

ASTM A320ASTM

Alloy and stainless steel bolting for low-temperature service

L7, L7M, B8, B8M

ASTM A307ASTM

Carbon steel bolts, studs and threaded rod, 60 000 psi tensile strength

Gr. A, B

ASTM F3125 / A325ASTM

High-strength structural bolts

Gr. A325, A490

ASTM F593 / F594ASTM

Stainless steel bolts, hex cap screws and studs / nuts

Alloy Group 1 (304), Group 2 (316)

ISO 898-1ISO

Mechanical properties of fasteners made of carbon and alloy steel – bolts, screws and studs

Property class 4.6, 8.8, 10.9, 12.9

ISO 3506-1ISO

Mechanical properties of corrosion-resistant stainless steel fasteners

A2-70, A4-70, A4-80

ISO 4014 / 4017ISO

Hexagon head bolts and screws – product grades A and B

M1.6 – M64

ISO 4032 / 4034ISO

Hexagon regular nuts

M1.6 – M64

DIN 931 / 933 / 934DIN

Hexagon head bolts, screws and nuts (legacy DIN designations)

Class 8.8, 10.9, A2, A4

IS 1363 / IS 1364BIS

Hexagon head bolts, screws and nuts – product grades C / A and B

M5 – M64

IS 1367BIS

Technical supply conditions for threaded steel fasteners

Property class 4.6 – 12.9

ASME B18.2.1 / B18.2.2ASME

Square, hex, heavy hex and askew head bolts and screws / nuts (inch series)

¼" – 4"

ASME B1.1 / B1.13MASME

Unified inch and metric screw threads

UNC, UNF, M-profile

Dimensions & General Requirements 12

ASME B36.10MASME

Welded and seamless wrought steel pipe – dimensions and schedules

NPS ⅛ to 80

ASME B36.19MASME

Stainless steel pipe – dimensions and schedules

Sch 5S, 10S, 40S, 80S

ASTM A999ASTM

General requirements for alloy and stainless steel pipe

Tolerances, testing, marking

ASTM A530ASTM

General requirements for specialized carbon and alloy steel pipe

Tolerances, testing, marking

ASTM A1016ASTM

General requirements for ferritic alloy, austenitic alloy and stainless steel tubes

Tolerances, testing, marking

ASTM A480ASTM

General requirements for flat-rolled stainless and heat-resisting steel plate, sheet and strip

Thickness, flatness, finish

ASTM A484ASTM

General requirements for stainless steel bars, billets and forgings

Size tolerances, finish

ASTM A6ASTM

General requirements for rolled structural steel bars, plates, shapes and sheet piling

Tolerances, testing, marking

ASTM A29ASTM

General requirements for hot-wrought carbon and alloy steel bars

Size tolerances, chemistry

ASTM A700ASTM

Guide for packaging, marking and loading methods for steel products for shipment

Packing & marking

ISO 1127ISO

Stainless steel tubes – dimensions, tolerances and conventional masses per unit length

D1 – D4, T1 – T5

IS 1852BIS

Rolling and cutting tolerances for hot-rolled steel products

Plates, bars, sections

Testing & Certification 14

EN 10204EN

Metallic products – types of inspection documents

Type 2.1, 2.2, 3.1, 3.2

ASTM A370ASTM

Test methods and definitions for mechanical testing of steel products

Tensile, hardness, impact

ASTM E8ASTM

Test methods for tension testing of metallic materials

Tensile, yield, elongation

ASTM A262ASTM

Practices for detecting susceptibility to intergranular attack in austenitic stainless steels

Practice A, B, C, E

ASTM A923ASTM

Test methods for detecting detrimental intermetallic phase in duplex stainless steels

Method A, B, C

ASTM G48ASTM

Test methods for pitting and crevice corrosion resistance by ferric chloride

Method A, C

NACE MR0175 / ISO 15156ISO

Materials for use in H₂S-containing environments in oil and gas production (sour service)

Compliance on request

ASTM E18ASTM

Test methods for Rockwell hardness of metallic materials

HRC, HRB

ASTM E10ASTM

Test method for Brinell hardness of metallic materials

HBW

ASTM E23ASTM

Test methods for notched bar impact testing of metallic materials

Charpy V-notch

ASTM E112ASTM

Test methods for determining average grain size

ASTM grain size number

ASTM E415 / E1086ASTM

Spark atomic emission spectrometric analysis of carbon / stainless steel

Chemical composition (PMI)

IS 1608BIS

Metallic materials – tensile testing

Tensile, yield, elongation

IS 1500 / IS 1586BIS

Brinell / Rockwell hardness test

HBW, HRC

Standard titles are paraphrased for reference. Material is supplied to the specification, grade, edition and supplementary requirements stated on the purchase order, with mill test certificates as per EN 10204 3.1 and third-party inspection (Bureau Veritas, DNV, Lloyd's Register, TÜV, EIL, IBR) on request. For grade details see Material Grades; for cross-references see Equivalent Grades.

Who Writes the Standards

Standards Organisations

ASTM

ASTM International

Material specifications for steel and alloys – chemistry, mechanical properties, heat treatment and testing (A-series ferrous, B-series non-ferrous, E & G test methods).

ASME

American Society of Mechanical Engineers

Dimensional standards for pipe, flanges and fittings (B36, B16) and the Boiler & Pressure Vessel Code, which adopts ASTM materials as "SA" / "SB" specifications.

EN

European Standards (CEN)

Harmonised European standards such as EN 10088 (stainless steels), EN 10216 (seamless pressure tubes), EN 1092-1 (flanges) and EN 10204 (inspection documents).

DIN

DIN – German Institute

German national standards. Many have been superseded by EN standards, but DIN designations and material numbers (W.Nr. 1.4301, 1.2379) remain widely used.

BS

British Standards Institution

BS 970 introduced the "EN" series of engineering steels (EN8, EN19, EN24, EN31) still used for ordering in India and the UK.

IS

Bureau of Indian Standards

Indian national standards such as IS 2062 (structural steel), IS 1239 (steel tubes) and IS 1570 (wrought steel designations).

JIS

Japanese Industrial Standards

Japanese designations such as SUS 304 and SUS 316, and product standards like JIS G4303 (stainless bars) and G3459 (stainless pipe).

MSS

Manufacturers Standardization Society

Standard practices for valves, fittings and flanges – e.g. MSS SP-43 (light-wall stainless fittings) and SP-97 (branch outlet fittings).

NF

AFNOR – French Standards

French designations still found on European drawings – Z2CND17-12 (316L), 42CD4 (42CrMo4), 35NCD6 (EN24), 100C6 (EN31). See our Equivalent Grades chart for the AFNOR column.

Get in Touch

Need a Material in a Specific Grade or Size?

Send us the product, grade, size, quantity and delivery location – our team replies with stock status and a competitive quote, usually the same working day.