Unified Numbering System
North American system: a letter for the family plus five digits – S stainless, N nickel, R reactive metals, C copper, K carbon & alloy, T tool steels.
S31603 · N06625 · T11302Equivalents are nearest comparable grades, not identical materials. Chemical limits, mechanical properties, heat treatment and permitted elements differ between standards, and a grade acceptable in one code may not be acceptable in another. Always confirm the exact specification against the mill test certificate and your design code before substituting a grade.
The same steel carries a different name in every standards system. These are the eight systems used in the tables below – recognising them makes any enquiry or mill certificate readable.
North American system: a letter for the family plus five digits – S stainless, N nickel, R reactive metals, C copper, K carbon & alloy, T tool steels.
S31603 · N06625 · T11302The familiar three-digit stainless numbers, four-digit engineering steel numbers and letter-number tool steel codes (D2, H13, M2) used across America and India.
316L · 4140 · D2 · M2German material number, written as 1.XXXX for steels and 2.XXXX / 3.XXXX for non-ferrous alloys. Widely used on European certificates.
1.4404 · 1.7225 · 1.3343The descriptive European name that spells out the chemistry – X2CrNiMo17-12-2 is 0.02% C, 17% Cr, 12% Ni, 2% Mo; HS6-5-2 is a 6% W, 5% Mo, 2% V high speed steel.
X2CrNiMo17-12-2 · 42CrMo4 · HS6-5-2BS 970 numbers for engineering steels (the origin of the EN8 / EN24 series), the 300S / 316S codes for stainless and BS 4659 "B" codes for tool steels.
817M40 (EN24) · 316S31 · BM2Bureau of Indian Standards designations – IS 1570 / IS 5517 for carbon and alloy steels (40Cr1Mo28), IS 2062 for structurals (E250) and IS 7291 for high speed steels (XT87W6Mo5Cr4V2).
E250 · 40Cr1Mo28 · XT87W6Mo5Cr4V2French designations that spell out the chemistry in letters – Z for stainless, C/CD/NCD for carbon, Cr-Mo and Ni-Cr-Mo steels – still common on European drawings.
Z3CND17-11-02 · 42CD4 · 35NCD6SUS for stainless, S__C for carbon steel, SCM / SNCM for alloy steels, SKD / SKS for tool steels and SKH for high speed steels.
SUS316L · SCM440 · SKD11 · SKH51Austenitic, ferritic, martensitic and duplex stainless grades across the six main systems.
| Grade | UNS | W.Nr. | EN / DIN name | BS | AFNOR (NF) | JIS |
|---|---|---|---|---|---|---|
| SS 202 Austenitic · Cr-Mn | S20200 | 1.4373 | X12CrMnNiN18-9-5 | 284S16 | Z12CMN17-07Az | SUS 202 |
| SS 304 Austenitic | S30400 | 1.4301 | X5CrNi18-10 | 304S31 | Z7CN18-09 | SUS 304 |
| SS 304L Austenitic | S30403 | 1.4307 (1.4306) | X2CrNi18-9 | 304S11 | Z3CN18-10 | SUS 304L |
| SS 303 Free-machining | S30300 | 1.4305 | X8CrNiS18-9 | 303S31 | Z8CNF18-09 | SUS 303 |
| SS 316 Austenitic | S31600 | 1.4401 | X5CrNiMo17-12-2 | 316S31 | Z7CND17-11-02 | SUS 316 |
| SS 316L Austenitic | S31603 | 1.4404 | X2CrNiMo17-12-2 | 316S11 | Z3CND17-11-02 | SUS 316L |
| SS 316Ti Stabilised | S31635 | 1.4571 | X6CrNiMoTi17-12-2 | 320S31 | Z6CNDT17-12 | SUS 316Ti |
| SS 317L Austenitic | S31703 | 1.4438 | X2CrNiMo18-15-4 | 317S12 | Z3CND19-15-04 | SUS 317L |
| SS 321 Stabilised | S32100 | 1.4541 | X6CrNiTi18-10 | 321S31 | Z6CNT18-10 | SUS 321 |
| SS 347 Stabilised | S34700 | 1.4550 | X6CrNiNb18-10 | 347S31 | Z6CNNb18-10 | SUS 347 |
| SS 309S Heat resisting | S30908 | 1.4833 | X12CrNi23-13 | 309S24 | Z15CN24-13 | SUS 309S |
| SS 310S Heat resisting | S31008 | 1.4845 | X8CrNi25-21 | 310S31 | Z12CN25-20 | SUS 310S |
| SS 410 Martensitic | S41000 | 1.4006 | X12Cr13 | 410S21 | Z12C13 | SUS 410 |
| SS 416 Free-machining | S41600 | 1.4005 | X12CrS13 | 416S21 | Z11CF13 | SUS 416 |
| SS 420 Martensitic | S42000 | 1.4021 | X20Cr13 | 420S37 | Z20C13 | SUS 420J1 |
| SS 430 Ferritic | S43000 | 1.4016 | X6Cr17 | 430S17 | Z8C17 | SUS 430 |
| SS 431 Martensitic | S43100 | 1.4057 | X17CrNi16-2 | 431S29 | Z15CN16-02 | SUS 431 |
| SS 904L Super austenitic | N08904 | 1.4539 | X1NiCrMoCu25-20-5 | 904S13 | Z2NCDU25-20 | SUS 890L |
| Duplex 2205 Duplex | S31803 / S32205 | 1.4462 | X2CrNiMoN22-5-3 | 318S13 | Z3CND22-05Az | SUS 329J3L |
| Super Duplex 2507 Super duplex | S32750 | 1.4410 | X2CrNiMoN25-7-4 | — | Z3CND25-06Az | — |
| Super Duplex S32760 Super duplex | S32760 | 1.4501 | X2CrNiMoCuWN25-7-4 | — | — | — |
Indian designations (IS 6911): 304 ≈ X04Cr19Ni9, 304L ≈ X02Cr19Ni10, 316 ≈ X04Cr17Ni12Mo2, 316L ≈ X02Cr17Ni12Mo2, 410 ≈ X12Cr12, 430 ≈ X07Cr17.
Structural, free-cutting, medium-carbon and pressure-rated carbon steels – ASTM, EN, BS 970, Indian and Japanese equivalents.
| Grade | ASTM / AISI / SAE | W.Nr. | EN / DIN name | BS | IS | JIS |
|---|---|---|---|---|---|---|
| IS 2062 E250 Structural | A36 / A283 Gr. C (similar) | 1.0038 / 1.0044 | S235JR / S275JR (St 37-2 / St 44-2) | BS 4360 43A | IS 2062 E250 (Fe 410) | SS400 |
| IS 2062 E350 High-tensile structural | A572 Gr. 50 (similar) | 1.0045 / 1.0553 | S355JR / S355J0 | BS 4360 50B | IS 2062 E350 (Fe 490) | SM490A |
| ST 52.3 Structural | A572 Gr. 50 (similar) | 1.0570 (1.0577) | S355J2 (St 52-3) | BS 4360 50D | IS 2062 E350 (similar) | SM490C |
| EN 1A Free-cutting | 1213 | 1.0715 | 11SMn30 (9SMn28) | 230M07 | IS 4431 11C10S25 | SUM 22 |
| EN 1A Leaded Free-cutting | 12L14 | 1.0718 | 11SMnPb30 | 230M07Pb | IS 4431 11C10S25Pb | SUM 24L |
| EN 3B Mild steel | 1020 | 1.0402 | C22 | 070M20 | IS 1570 20C8 | S20C |
| EN 8 Medium carbon | 1040 | 1.0511 | C40 | 080M40 | IS 1570 40C8 | S40C |
| C45 Medium carbon | 1045 | 1.0503 | C45 | 080M46 | IS 1570 45C8 | S45C |
| EN 9 High carbon | 1055 | 1.0535 | C55 | 070M55 | IS 1570 55C8 | S55C |
| A106 Gr. B Seamless pipe | ASTM A106 Gr. B / A53 Gr. B | 1.0405 (similar) | St 45.8 / P265GH (similar) | BS 3602 430 | IS 1978 Gr. B (similar) | STPG 410 |
| A333 Gr. 6 Low-temperature pipe | ASTM A333 Gr. 6 | 1.0488 (similar) | P275NL1 / TStE 285 (similar) | BS 3603 430 LT50 | — | STPL 380 |
| A105 Carbon steel forging | ASTM A105 | 1.0460 | C22.8 / P250GH | BS 1503 221-430 | IS 2004 Cl. 2 (similar) | SF 440A (similar) |
| A350 LF2 Low-temp. forging | ASTM A350 LF2 | 1.0566 (similar) | P355NL1 / TStE 355 (similar) | BS 1503 224-490 LT50 | — | SFL 2 (similar) |
| A234 WPB Butt-weld fitting | ASTM A234 WPB | 1.0460 / 1.0405 | P250GH / P265GH (similar) | BS 1965 Gr. 410 | — | PT 410 (similar) |
| SA 516 Gr. 70 Boiler quality plate | ASTM / ASME A516 Gr. 70 | 1.0481 (similar) | P295GH / 17Mn4 (similar) | BS 1501 224-490 | IS 2002 Gr. 2 (similar) | SGV 480 (similar) |
| SA 516 Gr. 60 Boiler quality plate | ASTM / ASME A516 Gr. 60 | 1.0425 (similar) | P265GH / HII (similar) | BS 1501 161-430 | IS 2002 Gr. 1 (similar) | SGV 410 (similar) |
| SA 210 Gr. A1 Boiler tube | ASTM / ASME A210 Gr. A1 | 1.0305 (similar) | St 35.8 / P235GH (similar) | BS 3059 360 | — | STB 410 |
| IS 1239 MS tube ERW tube | ASTM A53 Gr. A (similar) | 1.0033 / 1.0038 | S195T / S235JR (similar) | BS 1387 (similar) | IS 1239 Pt 1 YSt 210 / 240 | SGP (similar) |
Pipe, plate and forging equivalents are approximate – pressure-part materials are code-specific and should be ordered to the exact ASTM / ASME, EN or IS specification required by the design code.
The EN-series engineering and case-hardening steels used across Indian industry, plus Cr-Mo pressure grades, with their AISI/SAE, German, Indian and Japanese equivalents.
| Grade | BS 970 | AISI / SAE / ASTM | W.Nr. | EN / DIN name | IS | JIS |
|---|---|---|---|---|---|---|
| EN 16 Mn-Mo | 605M36 | — (no direct equivalent) | — | 36Mn6 (similar) | IS 1570 37Mn2 (similar) | — |
| EN 18 Cr steel | 530M40 | 5140 | 1.7035 | 41Cr4 | IS 1570 40Cr4 | SCr 440 |
| EN 19 / 4140 Cr-Mo | 709M40 | 4140 | 1.7225 | 42CrMo4 | IS 1570 40Cr1Mo28 | SCM 440 |
| EN 24 / 4340 Ni-Cr-Mo | 817M40 | 4340 | 1.6582 (similar) | 34CrNiMo6 | IS 1570 40Ni2Cr1Mo28 | SNCM 439 |
| EN 31 / 52100 Bearing steel | 535A99 | 52100 | 1.3505 | 100Cr6 | IS 4398 103Cr1 | SUJ 2 |
| EN 36 Ni-Cr case-hardening | 655M13 | 3310 (similar) | 1.5752 | 14NiCr14 | IS 1570 13Ni3Cr80 | SNC 815 |
| EN 41B Nitriding | 905M39 | Nitralloy 135M | 1.8509 | 41CrAlMo7-10 | IS 1570 40Cr2Al1Mo18 | SACM 645 |
| EN 47 Spring steel | 735A51 | 6150 | 1.8159 | 51CrV4 | IS 3195 50Cr4V2 | SUP 10 |
| EN 353 Case-hardening | 815M17 | 8620 (similar) | 1.6566 (similar) | 17NiCrMo6-4 | IS 1570 15Ni4Cr1 (similar) | SNCM 220 (similar) |
| SAE 8620 Case-hardening | 805M20 | 8620 | 1.6523 | 20NiCrMo2-2 | IS 1570 20NiCrMo2 (similar) | SNCM 220 |
| 16MnCr5 Case-hardening | 527M17 (similar) | 5115 | 1.7131 | 16MnCr5 | IS 1570 16Mn5Cr4 | SCr 415 |
| 20MnCr5 Case-hardening | — | 5120 (similar) | 1.7147 | 20MnCr5 | IS 1570 20Mn5Cr4 | SCr 420 |
| SAE 4130 Cr-Mo | 708A30 (similar) | 4130 | 1.7218 | 25CrMo4 | IS 1570 30Cr1Mo28 (similar) | SCM 430 |
| A335 P11 / A213 T11 1¼Cr-½Mo | BS 3604 620-440 | ASTM A335 P11 · A182 F11 · A234 WP11 | 1.7335 | 13CrMo4-5 | — | STPA 23 |
| A335 P22 / A213 T22 2¼Cr-1Mo | BS 3604 622-490 | ASTM A335 P22 · A182 F22 · A234 WP22 | 1.7380 | 10CrMo9-10 | — | STPA 24 |
| A335 P5 5Cr-½Mo | BS 3604 625 | ASTM A335 P5 · A182 F5 · A234 WP5 | 1.7362 | X12CrMo5 | — | STPA 25 |
| A335 P91 / A213 T91 9Cr-1Mo-V | — | ASTM A335 P91 · A182 F91 · A234 WP91 | 1.4903 | X10CrMoVNb9-1 | — | STPA 28 |
| A387 Gr. 11 / 22 Cr-Mo plate | BS 1501 620 / 622 | ASTM A387 Gr. 11 / Gr. 22 | 1.7335 / 1.7380 | 13CrMo4-5 / 10CrMo9-10 | — | SCMV 3 / SCMV 4 |
| A193 B7 Alloy bolting | 708M40 (similar) | ASTM A193 B7 (4140 / 4142) | 1.7225 | 42CrMo4 | IS 1367 Cl. 10.9 (similar) | SCM 440 / SNB 7 |
Indian designations follow IS 1570 (Parts 4 & 5) and IS 5517. Ask us for the IS equivalent of any other grade.
Cold work, hot work, mould and valve steels in AISI, Werkstoff, DIN / ISO 4957, BS 4659, Indian and JIS designations.
| Grade | AISI | W.Nr. | DIN / ISO 4957 name | BS 4659 | IS 3749 / AFNOR | JIS |
|---|---|---|---|---|---|---|
| D2 (HCHCr) Cold work | D2 | 1.2379 | X153CrMoV12 | BD2 | XT160Cr12 · Z160CDV12 | SKD 11 |
| D3 (HCHCr) Cold work | D3 | 1.2080 | X210Cr12 | BD3 | XT210Cr12 · Z200C12 | SKD 1 |
| D6 Cold work · W | D6 | 1.2436 | X210CrW12 | BD6 | Z210CW12 | SKD 2 |
| A2 Cold work · Air hardening | A2 | 1.2363 | X100CrMoV5 | BA2 | Z100CDV5 | SKD 12 |
| O1 (OHNS) Oil hardening | O1 | 1.2510 | 100MnCrW4 | BO1 | XT100Mn1Cr1W1 · 90MWCV5 | SKS 3 |
| S7 Shock resisting | S7 | 1.2355 (similar) | 50CrMoV13-15 | — | — | — |
| H11 Hot work | H11 | 1.2343 | X38CrMoV5-1 | BH11 | XT35Cr5MoV1 · Z38CDV5 | SKD 6 |
| H13 Hot work | H13 | 1.2344 | X40CrMoV5-1 | BH13 | XT35Cr5MoV1 · Z40CDV5 | SKD 61 |
| DB6 Hot work die block | L6 (similar) | 1.2714 | 55NiCrMoV7 | BH224/5 | T55Ni2Cr65Mo30 · 55NCDV7 | SKT 4 |
| P20 Plastic mould | P20 | 1.2311 | 40CrMnMo7 | — | 35CMD7 (similar) | — |
| P20+Ni Plastic mould | P20 modified | 1.2738 | 40CrMnNiMo8-6-4 | — | 40CMND8 (similar) | — |
| Silver Steel Ground bar | W1 (similar) | 1.2210 (similar) | 115CrV3 | BS 1407 | — | SK 105 (similar) |
| EN 52 Valve steel | — (UNS S65007) | 1.4718 | X45CrSi9-3 | 401S45 | IS 45Cr9Si4 · Z45CS9 | SUH 1 |
| 21-4N Valve steel · Austenitic | — (UNS S63008) | 1.4871 | X53CrMnNiN21-9 | 349S54 | Z52CMN21-09Az | SUH 35 |
Tungsten (T), molybdenum (M), cobalt and powder-metallurgy high speed steels – AISI, Werkstoff, ISO 4957, BS 4659, IS 7291 and JIS codes side by side.
| Grade | AISI | W.Nr. | ISO 4957 name | BS 4659 | IS 7291 | JIS |
|---|---|---|---|---|---|---|
| T1 W 18-0-1 | T1 | 1.3355 | HS18-0-1 | BT1 | XT72W18Cr4V1 | SKH 2 |
| T4 W-Co 18-1-2-5 | T4 | 1.3255 | HS18-1-2-5 | BT4 | XT75W18Co5Cr4MoV1 | SKH 3 |
| T15 W-Co, high V | T15 | 1.3202 | HS12-1-5-5 | BT15 | — | SKH 10 |
| T42 W-Mo-Co super | T42 | 1.3207 | HS10-4-3-10 | BT42 | XT125WCo10Cr4Mo4V3 | SKH 57 |
| M2 Mo 6-5-2 | M2 | 1.3343 | HS6-5-2 (HS6-5-2C) | BM2 | XT87W6Mo5Cr4V2 | SKH 51 |
| M3 Class 2 Mo, high V | M3:2 | 1.3344 | HS6-5-3 | BM4 (similar) | XT120W6Mo5Cr4V3 (similar) | SKH 53 |
| M35 Mo-Co 6-5-2-5 | M35 | 1.3243 | HS6-5-2-5 | BM35 | XT90W6Co5Mo5Cr4V2 | SKH 55 |
| M42 Mo-Co super | M42 | 1.3247 | HS2-10-1-8 | BM42 | XT110Mo10Co8Cr4W2 | SKH 59 |
| M7 Mo 2-9-2 | M7 | 1.3348 | HS2-9-2 | — | XT100Mo9W2Cr4V2 (similar) | SKH 58 (similar) |
| ASP 23 PM 6-5-3 | M3:2 PM (similar) | 1.3395 | HS6-5-3 PM | — | — | SKH 53 PM (similar) |
| ASP 30 PM 6-5-3-8 | — | 1.3294 | HS6-5-3-8 PM | — | — | SKH 40 (similar) |
| ASP 60 PM 6-7-6-10 | — | 1.3292 (similar) | HS6-7-6-10 PM | — | — | — |
IS 7291 names spell out the chemistry: XT87W6Mo5Cr4V2 = 0.87% C, 6% W, 5% Mo, 4% Cr, 2% V (= M2). ASP® is a trademark of Erasteel; equivalent PM grades from other mills are supplied to the same ISO designation.
Trade names, UNS numbers and their European equivalents – part of our non-ferrous range.
| Grade | UNS | W.Nr. | EN / DIN name | BS | Type |
|---|---|---|---|---|---|
| Nickel 200 / 201 Pure nickel | N02200 / N02201 | 2.4066 / 2.4068 | Ni 99.2 / LC-Ni 99 | NA 11 / NA 12 | Commercially pure |
| Inconel 600 Ni-Cr-Fe | N06600 | 2.4816 | NiCr15Fe | NA 14 | Solid solution |
| Inconel 601 Ni-Cr-Fe-Al | N06601 | 2.4851 | NiCr23Fe | — | Heat resisting |
| Inconel 625 Ni-Cr-Mo-Nb | N06625 | 2.4856 | NiCr22Mo9Nb | NA 21 | Solid solution |
| Inconel 718 Ni-Cr-Nb | N07718 | 2.4668 | NiCr19Nb5Mo3 | — | Age hardening |
| Monel 400 Ni-Cu | N04400 | 2.4360 | NiCu30Fe | NA 13 | Solid solution |
| Monel K-500 Ni-Cu-Al-Ti | N05500 | 2.4375 | NiCu30Al | NA 18 | Age hardening |
| Hastelloy C-276 Ni-Mo-Cr | N10276 | 2.4819 | NiMo16Cr15W | — | Solid solution |
| Hastelloy C-22 Ni-Cr-Mo-W | N06022 | 2.4602 | NiCr21Mo14W | — | Solid solution |
| Incoloy 800 / 800H Ni-Fe-Cr | N08800 / N08810 | 1.4876 / 1.4958 | X10NiCrAlTi32-21 | NA 15 / NA 15(H) | Heat resisting |
| Incoloy 825 Ni-Fe-Cr-Mo | N08825 | 2.4858 | NiCr21Mo | NA 16 | Corrosion resisting |
| Titanium Grade 2 Commercially pure | R50400 | 3.7035 | Ti2 | BS TA2 | CP titanium |
| Titanium Grade 5 Ti-6Al-4V | R56400 | 3.7165 | TiAl6V4 | BS TA10 | Alpha-beta alloy |
Inconel®, Monel® and Incoloy® are trademarks of Special Metals Corporation; Hastelloy® is a trademark of Haynes International. Material is supplied to the UNS number and specification stated on your order.
North American UNS / alloy numbers alongside European and Indian designations – see our Non-Ferrous Metals page.
| Grade | UNS / Alloy | EN number | EN / DIN name | W.Nr. | IS / Notes |
|---|---|---|---|---|---|
| Copper ETP Electrolytic tough pitch | C11000 | CW004A | Cu-ETP | 2.0065 | IS 191 ETP · ~100% IACS |
| Copper DHP Phosphorus deoxidised | C12200 | CW024A | Cu-DHP | 2.0090 | IS 191 DHP · weldable |
| Brass – free cutting CuZn36Pb3 | C36000 | CW603N | CuZn36Pb3 | 2.0375 | IS 319 Gr. 1 · machinability benchmark |
| Brass – 70/30 Cartridge brass | C26000 | CW505L | CuZn30 | 2.0265 | IS 410 CuZn30 · deep drawing |
| Brass – 63/37 Common brass | C27200 / C27400 | CW508L | CuZn37 | 2.0321 | IS 410 CuZn37 · general sheet & strip |
| Naval brass CuZn39Sn1 | C46400 | CW719R | CuZn39Sn1 | 2.0530 | IS 291 Gr. 2 (similar) · marine |
| Cupro-nickel 90/10 CuNi10Fe1Mn | C70600 | CW352H | CuNi10Fe1Mn | 2.0872 | IS 1545 (similar) · seawater |
| Cupro-nickel 70/30 CuNi30Mn1Fe | C71500 | CW354H | CuNi30Mn1Fe | 2.0882 | Condenser tubes |
| Aluminium bronze AB2 Ni-Al bronze | C95500 / C63000 (similar) | CC333G / CW307G | CuAl10Fe5Ni5 | 2.0975 | BS 1400 AB2 · IS 305 AB2 |
| Gunmetal LG2 Leaded gunmetal | C83600 | CC491K | CuSn5Zn5Pb5 | 2.1096 | BS 1400 LG2 · IS 318 Gr. 2 |
| Phosphor bronze PB1 Tin bronze | C90700 (cast) / C51000 (wrought) | CC481K / CW451K | CuSn10-P / CuSn5 | 2.1052 / 2.1016 | BS 1400 PB1 · IS 28 Gr. 2 |
| Aluminium 6061 Al-Mg-Si-Cu | A96061 | EN AW-6061 | AlMg1SiCu | 3.3211 | IS 65032 · general structural |
| Aluminium 6082 Al-Si-Mg-Mn | A96082 | EN AW-6082 | AlSi1MgMn | 3.2315 | IS 64430 · BS HE30 · highest strength 6xxx |
| Aluminium 6063 Al-Mg-Si | A96063 | EN AW-6063 | AlMg0.7Si | 3.3206 | IS 63400 · extrusions, architectural |
| Aluminium 5083 Al-Mg | A95083 | EN AW-5083 | AlMg4.5Mn0.7 | 3.3547 | IS 54300 · marine grade |
| Aluminium 7075 Al-Zn-Mg-Cu | A97075 | EN AW-7075 | AlZn5.5MgCu | 3.4365 | IS 74530 · aerospace, tooling |
| Aluminium 1100 Commercially pure | A91100 | EN AW-1100 | Al99.0Cu | 3.0205 | IS 19000 · utensils, chemical equipment |
This chart covers our most-requested grades. Send us the designation from your drawing, standard or mill certificate and we will identify the nearest equivalent we can supply – and confirm whether it is acceptable for your application.
Four checks before accepting one grade in place of another.
Element ranges differ between standards – carbon, nitrogen and trace limits especially
Tensile, yield, hardness and impact requirements may not be identical
Design codes list permitted materials – an equivalent may not be an approved substitute
The mill certificate states what the material actually is – read it before accepting
Send us the product, grade, size, quantity and delivery location – our team replies with stock status and a competitive quote, usually the same working day.