Surface & Coating
- Black (mill varnish)
- Hot-dip galvanised
- Shot-blasted & primed
- Bare / pickled
- Zinc / cadmium plated bolting
- PTFE-coated studs
Galvanising to IS 4736 / ASTM A153 arranged on request.
Carbon steel is iron alloyed principally with carbon (up to about 2 %) and manganese, with no deliberate addition of chromium, nickel or molybdenum. Its strength, weldability and low cost make it the default material for steam, water, oil and gas piping, boilers, pressure vessels and structures wherever corrosion can be managed by wall thickness, coating or inhibitors.
We stock carbon steel as a pressure-grade family: pipe to ASTM A106 / A53 / API 5L / A333, forgings to A105 and A350 LF2, fittings to A234 WPB, plate to SA 516 and medium-carbon bars such as C45 and EN 8. Every item is traceable to a heat number and a manufacturer test certificate, and IBR-certified material is available for boiler work.
Typical composition and property values from the current ASTM / ASME specifications; the edition stated on your order governs. Other grades can be sourced against order.
Swipe sideways to see all columns.
| Grade | UNS / Equivalent | Key Composition (wt %) | Properties | Typical Use |
|---|---|---|---|---|
| A106 Gr. B / Gr. C | K03006 / K03501 | C ≤ 0.30 / 0.35 · Mn 0.29–1.06 · Si ≥ 0.10 | Seamless pipe for high-temperature service; YS ≥ 240 / 275 MPa; killed, fine-grain practice | Steam, boiler feed, refinery and power-plant piping up to about 425 °C |
| A53 Gr. B | K03005 | C ≤ 0.30 · Mn ≤ 1.20 | Seamless or ERW pipe, black or hot-dip galvanised; YS ≥ 240 MPa | Water, air, gas and steam lines, structural and mechanical uses |
| API 5L Gr. B / X42 – X70 | — | C ≤ 0.26 (PSL 1) · Mn ≤ 1.20–1.65; micro-alloyed for X grades | Line pipe, PSL 1 or PSL 2; yield from 245 MPa (Gr. B) to 485 MPa (X70) | Oil, gas and water transmission pipelines, flowlines |
| A333 Gr. 6 | K03006 | C ≤ 0.30 · Mn 0.29–1.06; normalised | Low-temperature pipe, Charpy impact tested at −45 °C | LPG, ammonia, cryogenic and cold-climate piping |
| A105 / A105N | K03504 | C ≤ 0.35 · Mn 0.60–1.05 · Si 0.10–0.35 | Forged carbon steel for pressure components; YS ≥ 250 MPa; N = normalised | Flanges, forged fittings, valve bodies up to 425 °C |
| A350 LF2 Cl. 1 | K03011 | C ≤ 0.30 · Mn 0.60–1.35; normalised or Q&T | Low-temperature forgings, impact tested at −46 °C | Flanges and forged fittings for cold and offshore service |
| A234 WPB | K03006 | C ≤ 0.30 · Mn 0.29–1.06 | Wrought butt-weld fittings for moderate and high temperature | Elbows, tees, reducers and caps matching A106 / A53 pipe |
| A516 Gr. 60 / 65 / 70 | K02100 / K02403 / K02700 | C ≤ 0.21–0.28 (by thickness) · Mn 0.55–1.30 | Boiler-quality (BQ) plate, fine grain, normalised; UTS 415–550 MPa; impact tested on request | Pressure vessels, boilers, heat-exchanger shells, storage tanks |
| A515 Gr. 60 / 70 | K02401 / K03101 | C ≤ 0.24–0.35 · Si 0.13–0.45; coarse grain | Plate for intermediate and higher-temperature pressure vessels | Boilers and vessels operating above about 350 °C |
| A537 Cl. 1 / Cl. 2 | K12437 | C ≤ 0.24 · Mn 0.70–1.60; normalised / Q&T | Heat-treated carbon-manganese-silicon pressure-vessel plate, YS ≥ 345 / 415 MPa | Thick-wall vessels, spheres, LPG bullets |
| A36 / A283 Gr. C | K02600 / K02401 | C ≤ 0.26 · Mn 0.80–1.20 (plate) | Structural carbon steel, YS ≥ 250 / 205 MPa, readily welded | Structures, bases, platforms, general fabrication |
| C45 / 1045 / EN 8 | G10450 · EN 1.0503 · 080M40 | C 0.42–0.50 · Mn 0.50–0.80 | Medium-carbon steel; through-hardening to about 55 HRC, UTS 570–700 MPa normalised | Shafts, axles, gears, bolts, studs, machine parts |
| 1018 / 1020 / EN 3 | G10180 / G10200 · 070M20 | C 0.15–0.23 · Mn 0.30–0.90 | Low-carbon, free-machining to good machinability; case-hardenable | Pins, spacers, machined fittings, case-hardened parts |
| SA 210 Gr. A1 / C | K02707 / K03501 | C ≤ 0.27 / 0.35 · Mn ≤ 0.93 / 0.29–1.06 | Seamless medium-carbon boiler and superheater tubes | Water walls, economisers, superheaters, headers |
| SA 192 · SA 179 | K01201 · K01200 | C 0.06–0.18 · Mn 0.27–0.63 | Seamless low-carbon tubes for boilers (192) and heat exchangers / condensers (179) | Boiler tubes, shell-and-tube heat exchangers, condensers |
Pipe, fittings, flanges and bolting are stocked as matching sets so a complete line can be supplied from one source.
Swipe sideways to see all columns.
| Product | Types Available | Size Range | Standards |
|---|---|---|---|
| Pipes & Tubes | Seamless & ERW pipe (black / galvanised), API line pipe, low-temperature pipe, boiler & heat-exchanger tubes, cold-drawn seamless (CDS) mechanical tube | NPS ⅛" – 24" · Sch 10 – XXS Tube OD 12 – 219 mm · wall 1.5 – 20 mm | ASTM A106, A53, A333, API 5L, SA 210, SA 192, SA 179, A519 |
| Sheets & Plates | Boiler-quality plate, pressure-vessel plate, HR sheet & coil, structural plate, chequered plate | Thickness 1.6 – 150 mm · widths up to 2500 mm · cut to size | ASTM A516 / A515 / A537 / A36, EN 10025, IS 2002 |
| Fittings | Butt-weld elbows, tees, reducers, caps, stub ends; forged socket-weld & threaded fittings; olets; low-temperature WPL6 fittings | Butt weld ½" – 24" · Forged ⅛" – 4", Class 3000 / 6000 / 9000 | ASTM A234 WPB / WPC, A420 WPL6, A105, ASME B16.9 / B16.11 |
| Flanges | Weld neck, slip-on, blind, socket-weld, lap joint, threaded, long weld neck, orifice and spectacle blinds | ½" – 24" (larger to B16.47) · Class 150 – 2500 | ASTM A105 / A105N, A350 LF2, ASME B16.5, B16.47, B16.36 |
| Round Bar | Black (hot-rolled) and bright (cold-drawn) rounds, forged bar, hex and flat bar | Ø 6 – 500 mm · lengths 3 – 6 m · cut pieces | ASTM A105, A108, A29; EN 10083-2; IS 1570 Pt 2 |
| Fasteners | Stud bolts, hex bolts, heavy hex nuts, washers, machine bolts, anchor bolts – plain, zinc or hot-dip galvanised, PTFE coated | M6 – M64 · ¼" – 3" · metric, UNC & 8UN | ASTM A193 B7, A194 2H, A307, A325; ISO 898 Gr. 8.8 / 10.9 |
Galvanising to IS 4736 / ASTM A153 arranged on request.
ASTM, ASME Section II, API, EN and IS specifications – supplied to the edition referenced on your purchase order.
From refinery piping to boiler tubes and structural fabrication – supplied to project sites, fabricators and maintenance stores across India and overseas.
A106 Gr.B and API 5L piping, A105 flanges, WPB fittings and B7 bolting for process units and pipelines
SA 210 / SA 192 boiler tubes, SA 516 Gr.70 drum and header plate, IBR-certified material
Utility piping, structural steel and pressure-vessel plate for plant construction and maintenance
A516 Gr.60 / 70, A537 and A515 plates with impact testing and ultrasonic examination
A333 Gr.6 pipe, A350 LF2 flanges and A420 WPL6 fittings for low-temperature systems
A36 / A283 plate, structural pipe and galvanised A53 pipe for buildings, bridges and utilities
C45, EN 8, 1018 / 1020 bars for shafts, pins, studs and machined components
Galvanised and black pipe, large-diameter pipe and fittings for water, air and gas distribution
Send specification, grade, form, size, quantity and certification needs and we quote accurately – usually the same working day.
Mild steel is simply the low-carbon end of the carbon steel family (about 0.05–0.25 % carbon), usually bought to structural standards such as IS 2062. In the piping and pressure-vessel trade "carbon steel" means material certified to ASTM / ASME pressure specifications – A106, A105, A516 and so on – with controlled chemistry, heat treatment, testing and traceability. See our mild steel page for IS-grade structural material.
A106 is always seamless and is the pipe for high-temperature and pressure process service. A53 covers both seamless and ERW pipe for general service such as water, air and gas, and is available galvanised. Seamless A53 Gr.B and A106 Gr.B are frequently triple-certified with API 5L Gr.B, which we can supply on request.
BQ plate is pressure-vessel plate – typically SA 516 Gr.70 or IS 2002 – produced with fine-grain, fully killed steel, normalised and tested per plate for tensile properties, with optional impact testing and ultrasonic examination. It is the standard plate for boilers, pressure vessels and heat exchangers and can be supplied with IBR certification.
Yes. Pipes, tubes, fittings, flanges and plates with Indian Boiler Regulations Form III-A / III-C certification are available from stock or against order for boiler and steam-line work.
All material is supplied with manufacturer test certificates as per EN 10204 3.1 covering ladle chemistry, mechanical properties, heat treatment and the applicable NDT. Third-party inspection by Bureau Veritas, DNV, Lloyd's Register, TÜV or EIL can be arranged on request.
Send us the product, grade, size, quantity and delivery location – our team replies with stock status and a competitive quote, usually the same working day.