Mon – Sat · 10:00 am – 7:00 pm

Quality Assurance

The right grade, the right documents, the right time – every consignment checked against your purchase order, the applicable standard and the mill test certificate before it leaves Mumbai.

MTC EN 10204 3.1 / 3.2 Heat-No. Traceability TPI Welcome
  • MTC EN 10204 3.1 mill test certificates
  • PMI Spectro / XRF alloy verification
  • TPI Bureau Veritas · DNV · Lloyd's · TÜV · EIL · IBR
  • LAB NABL / government-recognised testing
Our Commitment

Quality Is Verified, Not Assumed

Since 2000, customers in the chemical, fertilizer, petrochemical, pharmaceutical, paper, sugar, cement, ship-building and engineering industries have relied on Honesty Impex for material that performs exactly as specified. A wrong grade, an unverified substitute or a missing certificate does not just delay a project – it can cause a failure in service. That is why we source only from approved mills and importers and build checks into every step, from receiving the material to loading the truck.

Our quality system is aligned with ISO 9001 principles, and we work to the product standards our customers specify – ASTM, ASME, EN, DIN, BS, IS and JIS. Material is supplied with the manufacturer's test certificate, and additional testing is arranged at NABL-accredited or government-recognised laboratories whenever the order calls for it.

Quality Policy Statement

Honesty Impex

We are committed to supplying ferrous and non-ferrous metal products that conform to the grade, specification, dimensions and quantity ordered by our customers – delivered on time and at a fair price. To achieve this, we shall:

  • Source material only from approved, reputed mills, manufacturers and importers whose certification and performance we have evaluated.
  • Supply every consignment with the manufacturer's mill test certificate (EN 10204 3.1; 3.2 on request).
  • Verify grade, dimensions and quantity against the purchase order and the applicable standard before dispatch, with PMI or laboratory testing where specified.
  • Maintain heat-number traceability from receipt to delivery, including on cut pieces.
  • Store, handle and pack material so that it reaches the customer free from damage and contamination.
  • Welcome customer and third-party inspection at every stage.
  • Listen to customer feedback, resolve any complaint promptly and fairly, and keep improving our procedures.
HB Hitesh M. BokadiaFor Honesty Impex
Our Assurance

Genuine Material – Proven by Documents

Unverified material is the hidden cause of leaks, cracks and rejections at site. Our answer is simple: supply the ordered grade from an approved source, prove it with certificates, and let you inspect it.

Grade Matches Certificate

The grade on the MTC is the grade in the material – confirmed by PMI (XRF / spectro) on request. Unknown or unmarked material is never passed off as a specified grade.

Approved Sources Only

Stock is purchased from reputed domestic mills and established overseas producers through evaluated importers, so certification and traceability are intact from the start.

Third-Party Inspection

Bureau Veritas, DNV, Lloyd's Register, TÜV, EIL, IBR and other agencies nominated by you can inspect, witness tests and stamp material at our premises before dispatch.

Independent Laboratory Tests

Chemical, mechanical, hardness, impact and corrosion tests are arranged at NABL-accredited or government-recognised laboratories when your order requires them.

Quality Objectives

Four Things We Get Right

Right Grade

Chemistry and mechanical properties that match the ordered specification – confirmed from the MTC and, where required, by PMI or laboratory testing.

Right Size

Diameter, wall thickness, schedule, length, width and flatness checked against the dimensional standard and the tolerances on your purchase order.

Right Documents

Complete, legible certificates and test reports whose heat numbers match the marking on the material supplied.

Right Time

Material packed, marked and dispatched on the committed date – because a delay on site costs as much as a defect.

Quality Assurance Process

Six Checkpoints, Every Order

From the mill to your site, each consignment passes through the same checkpoints.

  1. 01

    Supplier Evaluation

    Material is sourced from established mills, manufacturers and importers, evaluated on product quality, certification and delivery performance.

  2. 02

    Incoming Inspection

    On receipt, material is checked for quantity, size, surface condition and visible defects, and the marking is compared with the delivery documents.

  3. 03

    Certificate Review

    The mill test certificate is reviewed against the ordered standard – chemical composition, mechanical properties, heat treatment and test results.

  4. 04

    Identification & Traceability

    Every piece keeps its heat number. When material is cut to size, the heat number is transferred to each cut piece before it leaves the bay.

  5. 05

    Pre-Dispatch Inspection

    A final check of grade, dimensions, quantity and marking against the purchase order. PMI, laboratory tests or third-party inspection are carried out here when specified.

  6. 06

    Packing & Dispatch

    Material is packed to protect surface and ends, tagged with heat numbers, and dispatched with the complete document set.

Testing & Inspection

Tests Available On Request

Beyond the mill certificate, the following tests can be arranged through NABL-accredited or government-recognised laboratories, as per the standard or purchase order you specify.

Positive Material Identification

Non-destructive verification of alloy composition using handheld XRF or spectro analysers – confirms the grade before dispatch.

  • XRF
  • OES

Chemical Analysis

Spark optical emission spectrometry to determine the full chemical composition of the heat.

  • ASTM E415
  • ASTM E1086

Tensile Testing

Ultimate tensile strength, yield strength (0.2% proof), elongation and reduction of area.

  • ASTM A370
  • ASTM E8

Hardness Testing

Brinell, Rockwell or Vickers hardness – essential for tool steels, high speed steels and heat-treated alloy bars.

  • ASTM E10
  • ASTM E18
  • ASTM E92

Impact Testing

Charpy V-notch toughness, including sub-zero testing for low-temperature grades such as ASTM A350 LF2 and A333 Gr.6.

  • ASTM E23
  • ASTM A370

Ultrasonic Testing

Volumetric examination for internal discontinuities in forgings, plates, round bars, pipes and tubes.

  • ASTM A388
  • ASTM A578
  • ASTM E213

Hydrostatic Testing

Pressure testing of pipes and tubes to the test pressure required by the product specification.

  • ASTM A530
  • ASTM A999
  • ASTM A1016

Corrosion Testing

Intergranular corrosion for stainless steels; pitting resistance and intermetallic-phase detection for duplex grades.

  • ASTM A262
  • ASTM G48
  • ASTM A923

Dimensional & Visual

OD, wall thickness, length, ovality, flatness and surface finish, checked against the applicable dimensional standard.

  • ASME B36.10M
  • ASME B36.19M
  • ASME B16.5

Tests beyond those reported on the mill certificate are carried out on request and may affect price and delivery time. Please specify requirements at the enquiry stage.

Documentation

Inspection Documents as per EN 10204

EN 10204 defines the types of inspection documents supplied with metallic products. Most industrial orders are supplied with a Type 3.1 certificate; Type 3.2 is issued when a purchaser's or third-party inspector witnesses the tests.

TypeDocumentContentValidated by
2.1Declaration of compliance with the orderStatement of compliance, without test resultsManufacturer
2.2Test reportCompliance statement with non-specific test resultsManufacturer
3.1Inspection certificate 3.1Specific test results of the supplied heat / lotManufacturer's authorised inspection representative, independent of production
3.2Inspection certificate 3.2Specific test results of the supplied heat / lotManufacturer's inspection representative and purchaser's representative or third-party inspector
Standards & Specifications

Supplied to International Standards

Material is supplied to the product specification stated on your order. Commonly supplied specifications include:

Pipes & Tubes

ASTM A312
Seamless & welded austenitic stainless steel pipe
ASTM A213 / A269
Stainless & alloy boiler, heat-exchanger and general-service tubes
ASTM A790
Duplex & super duplex stainless steel pipe
ASTM A106 / A53
Seamless & ERW carbon steel pipe
ASTM A335
Seamless alloy steel pipe (P11, P22, P91)
IS 1239 / IS 3589
Mild steel ERW pipes & tubes

Sheets & Plates

ASTM A240
Stainless & duplex steel plate, sheet and strip
ASTM A516
Carbon steel pressure-vessel plate (Gr. 60 / 70)
IS 2062
Hot-rolled mild / structural steel (E250 / E350)
EN 10025
Hot-rolled structural steels (S235 / S355)

Round Bars

ASTM A276 / A479
Stainless steel bars and shapes
BS 970 / EN 10083
Engineering & alloy steels – EN 8, EN 19, EN 24, EN 31, C45
ASTM A600 / IS 7291
High speed steels (T1, M2, M35, M42)
ASTM A681 / DIN 17350
Tool & die steels (D2, D3, H11, H13, P20)

Fittings & Flanges

ASTM A182
Forged alloy & stainless flanges and fittings (F304, F316L, F11, F22, F51)
ASTM A105 / A350
Carbon steel forgings; low-temperature grade LF2
ASTM A403 / A234
Wrought stainless & carbon steel butt-weld fittings
ASME B16.5 / B16.9 / B16.11
Flange, butt-weld and forged fitting dimensions

Non-Ferrous & Nickel Alloys

ASTM B165 / B164
Monel 400 seamless pipe & tube / rod & bar
ASTM B167 / B443
Inconel 600 pipe & tube / Inconel 625 plate & sheet
ASTM B171 / B466
Copper-nickel plate / seamless tube
ASTM B338 / B265 / B348
Titanium tube / plate / bar

Fasteners & Dimensions

ASTM A193 / A194
Alloy & stainless bolting (B7, B8, B8M) and nuts (2H, 8, 8M)
ISO 898-1 / IS 1367
Property classes 4.6 – 12.9 for carbon & alloy steel fasteners
ASME B36.10M / B36.19M
Carbon & stainless steel pipe dimensions
EN 10088 / JIS G4303
European & Japanese stainless designations
Identification & Traceability

Read the Marking, Trace the Heat

Typical marking on a seamless stainless steel pipe. The heat number links the material to its mill test certificate – so you can trace every length back to the melt.

ASTM A312 TP316L SMLS 2" NB × SCH 40S HEAT No. 12345A HT

  1. 1Specification Product standard the pipe is made to
  2. 2Grade Material grade within that standard
  3. 3Type SMLS = seamless, WLD = welded
  4. 4Size Nominal bore and wall schedule
  5. 5Heat Number Links the pipe to its MTC
  6. 6Test HT = hydrostatically tested

No Cross-Contamination

Stainless, nickel alloys and non-ferrous metals are stored and handled separately from carbon and mild steel to avoid free-iron contamination and rust staining.

End & Surface Protection

Pipe ends are capped, flange faces and threads are protected, and PVC-coated sheets keep their film until fabrication.

Seaworthy Packing

Bundles, wooden crates or pallets with protective wrapping for export shipments and long-distance transport.

Tagged & Labelled

Every bundle and crate carries a tag with grade, size, quantity and heat number that matches the certificate.

Quality Requirements?

Need MTCs, Special Tests or Third-Party Inspection?

Tell us the specification, grade, size, quantity and the documents or inspection you require – we will confirm everything before you place the order.